Front:120mm blue led fan *4 (included) or 140mm fan*2 (optional) or 200mm fan*1 (optional)
Rear:120mm *1 (included), 90mm*1 (optional)
Top:140/120mm * 2 (optional)
BottomL:120mm fan*1(optional)
POWER SUPPLY
Standard ATX PS2 up to 200mm (optional)
MAXIMUM COMPATIBILITY
Graphics Card Length:348mm
CPU Cooler Height:174mm
Cable rounting behind MB tray:95mm
MODEL & EAN CODE
Standard Black version: AI-07BW
EAN Code:6952093600343
UPC Code:848043000348
HARDWARE.INFO
Voor de prijs-prestatieverhouding zouden we al een Bronze Award uitreiken, maar gezien de geboden kwaliteit en functionaliteit maken we daar graag Silver van. Source
HWT.DK-GOLD AWARD
Very nice casing, with alternative and good location of the motherboard. Lots of options for air cooling. However, you should just take into account that there is not much room for a CPU cooler, since, as shown in the test, it may not go beyond the motherboard edge. Source
ELCHAPUZASINFORMATICO.COM-GOLD AWARD
La Anidées AI7 se presenta como un chasis cubico que aparenta ser compacto, pero lo que pierde de altura lo gana de anchura. En su interior podemos instalar placas base ATX junto a componentes de gama alta y montar un equipo de altas prestaciones, pues nos ofrece gran libertad en aspectos como disipadores, graficas o radiadores. Source
GAMEZOOM.NET
Der Anidées AI7 zeigt im Vergleich zu einem herkömmlichen Cube deutliche Unterschiede, was bereits bei der Breite beginnt. Ein zweigeteilter Innenraum sowie die vier Frontlüfter, heben ihn von der breiten Masse ab. Hannes meint: Ein breiter Cube mit grandiosem Airflow! Source
The anidees AI7 looks exactly the same and is just as big as the AI7m we reviewed in the past, but is able to hold a full ATX board since its interior layout has been rearranged completely. This is achieved by following the same scheme as in other cube cases, which move the secondary components behind the motherboard tray. anidees does a good job in still allowing for enough space to install large air coolers or long graphics cards and even goes as far as to include five fans right out of the box to set the AI7 apart from…
BJORN3D – SEAL OF APPROVAL
#anidees has provided us with a roomy, well equipped case with the AI7. The short and stocky look is backed up with two separate chambers to assist with both case cooling, as well as component installation and cable management. A large window on the left side of the case gives system builders a chance to show off their rigs, and the four included 120mm fans with blue LED lighting will…
COMPTOIR-HARDWARE.COM
Ce modèle double compartiment, plutôt compact, offre de bonnes performances et un certain confort d’utilisation tant sur le plan de l’agencement que des nuisances sonores générées. Source
OVERCLOCKERS.COM
It’s very appealing with its large side window, ample room for an ATX motherboard, PSU, and oversized GPU’s, plus the ability to hold four 3.5″ HDDs and an SSD (four 3.5″ with a 5.25″ drive installed). Mounting a radiator in the top of this case will remove at least one HDD and the 5.25″ drive. Source
XTREMEHARDWARE – SILVER AWARD
Anidees con il modello AI7 (disponibile anche il modello Micro-ATX AI7m) viene in contro a coloro che cercano un case compatto e facilmente collocabile senza perdere la predisposizione o supporto anche a soluzioni AIO in unione a configurazioni di medio livello. Il design sicuramente non manca al modello AI7 soprattutto nel modello Window con paratia finestrata in plexyglass. Source
ETEKNIX
With a huge range of features, extensive component compatibility, a very impressive stock cooling configuration and a stylish design, the Anidees A17 gives a huge amount in return for a fairly modest price. If you’re looking to get the most out of a chassis that maintains a compact size, you’ll struggle to beat what the A17 has to offer. Source
